ROAD MARKING MACHINE

TECHNICAL SPECIFICATIONS

• Road marking machine made by stainless steel.
• Manual hand push machine.
• Two laying shoes (Die) 10cm & 15cm with thickness
  controller tips.
• Paint tank capacity - 100 kg
•  stainless steel tank.
• Glass beads containers capacity - 15kg.
• Dimensions of application “W20* L36* H36”inch.
• Dispenser box :- 50-200 mm Adjustable Dispenser box
• Heating system :- LPG commercial
• Front wheel size :- 10*2 Casting with Rubber
• Real wheel size :- 6*2 Casting Wheel with Rubber
• Weight of total system :- 165kg.

TECHNICAL SPECIFICATIONS

 Road marking machine tank made by stainless steel 204.

• Dispenser can be to adjustable 50mm to 200mm
• Two laying shoes dia 10cm and 15cm with thickness controller tips.
• Hydraulic driven connect the road marking machine.
• Center line Automatic system.
• Thermoplastic paint tank capacity 150kg.
• Glass beads container capacity 20kg.
• Heating system LPG commercial.
• Glass beads spraying rotor type.
• One driving seat.
• Driving Briggs & Stratton
• Engine 5.5 HP
• Fuel petrol.
• Wight of total system 350kg.

TECHNICAL SPECIFICATIONS

 Bending Rebar Diameter – upto 32 mm

Plate Diameter – 360 mm

Bending Speed – 10-12 r/min

Motor Power – 3 kW

Voltage – 415 V

Motor Speed – 1440 r/min

Weight – 320 Kg 

TECHNICAL SPECIFICATIONS

 Bending Rebar Diameter – upto 40 mm

Plate Diameter – 360 mm

Bending Speed – 3 – 15 r/min

Motor Power – 5 kW

Voltage – 415 V 

Motor Speed – 1440 r/min

Weight – 430 Kg

TECHNICAL SPECIFICATIONS

  Usage/Application - Construction

Model Name - AYS

 52 

Material - TMT Bar Cutting

 Range - 8mm to 42mm

Power  - 5 HPMotor

 Speed - 2880 R/min

Motor Power - 5 HP

Phase - three Phase

Rust Proof Yes

Max Cutting Thickness - 40MM 

TECHNICAL SPECIFICATIONS 

Engine Power 13 HP 

Drive Type - Hydraulic Double Drive

Drum Width - 900 mm

Vibrating Clutch Method Automatic Vibration Frequency - 65 Hz

Power - 8.5 kW Load55/10N/cm

Vibration Control Hydraulic Vibration Swing - 0.25 mm

Oil Tank - 40 Litres (Hydraulic

Nominal Amplitude - 0.6 mm

Exciting Force - 60 KN

Water Tank - 80 Litres

Package Size1250x800x1100 mm

Walking Type Forward, Backward 

Starting - Self Start 45 A Electric Walking Speed

0-8 km/hFuel Consumption - 386 gm/kwh

Wheel Size 900 x 560 mm x2 Wheel base - 470 mm

Weight - 1300 Kg

Exterior Size 2100x1000x1650 mm Lubricant Quantity - 1 Litre

Double Drum Ride On Roller is a compact, self-propelled machine used for soil, asphalt, and gravel compaction in small to medium-scale construction projects.  

TECHNICAL SPECIFICATIONS

Engine (Diesel) / – 9 HP

Vibratory Frequency – 70 HZ 

Grade Ability –30%

Centrifugal Force – 20 KN

Water Tank Capacity – 20 Ltr

Drum Size (DIA X W)–425 X 600 MM x2

Max Travelling Speed–0-4 KM/H

Transmission System–Hydraulic

Weight – 550 kg approx 

 TECHNICAL SPECIFICATIONS

DRUM CAP - 240 LTR

ENGINE - HONDA - GX 160

POWER - 4 HP/2.9 KW

THICKNESS - 2MM

WIDTH - 70 CM

NET WEIGHT - 70 KG

SIZE - 79 X 75 X49 CM

 TECHNICAL SPECIFICATIONS

 Usage/Application – Road Cutting

Blade Capacity –(inch)-8

Material – Mild Steel

Weight – 100 kg

Blade Materia – SS

Power–5 hp 

 TECHNICAL SPECIFICATIONS

  Brand/Make –  HONDA GX 160 / 80

 Material – Mild Steel

Power – 1.5 HP Engine

Thickness of Niddle –  40, 60 mm

Length – 4 & 6 Meter

Material – Cast Iron

 Cone – Mild SteelWheels– 

TECHNICAL SPECIFICATIONS

  Material - MS

Packaging Type - Pack 

Phase 3 Phase & Single phase

Frequency 50-60 Hz

Drive Mode - Electric

Application - Industrial 

 TECHNICAL SPECIFICATIONS

MODEL -  AYS 500

Single phase - 220 V 

Motor - 3.5 HP with built in brakes.

Hand held wired switch for UP /DOWN

Gear box sealed.

Wire rope rust resistant  - 8 mm thick

(Rated Capacity 2 Tons)

Lifting load -(double stay 600 kgs- Single stay 300 kgs )

Lifting height 70 mtr

Sand Box attached.

360 degree rotation.

Dead weights to be put on site.

Self installation.

Trouble free.